SAFETY INSTRUCTIONS
Safety Instructions for the Operator | Safety Instructions for the Installer |
WARNING
Do not open the equipment.
Only qualified personnel should work inside
the equipment.
Do not disassemble or modify the equipment.
Fire, electrical shock or serious injury can result.
Use the proper fuse.
Fuse rating is shown on the equipment. Use of a wrong fuse can result in damage to the equipment.
Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.
Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.
CAUTION
A warning label is attached to the equipment. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer.
WARNING | Name: Warning Label (2) | |
Type: | ||
To avoid electrical shock, do not | ||
remove cover. No | Code No.: | |
parts inside. |
|
About the TFT LCD 
The TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The remaining 0.015% of the pixels may drop out or blink, how- ever this is not an indication of malfunc- tion.
WARNING
Do not open the cover unless totally familiar with electrical circuits and service manual.
Improper handling can result in electrical shock.
Turn off the power at the switchboard before beginning the installation.
Fire or electrical shock can result if the power is left on.
Do not install the equipment where it may get wet from rain or water splash.
Water in the equipment can result in fire, electrical shock or damage to the equip- ment.
CAUTION
Ground the equipment to prevent mutual interference.
Observe the following compass safe distances to prevent interference to a magnetic compass:
| Standard | Steering |
| compass | compass |
|
|
|
1.55 m | 1.05m | |
|
|
|
Locate the
When lifting the display unit, hold it together with the cover.
Grasping by the cover alone may allow the display unit to fall, resulting in possible injury or damage to the equipment.
i
