1 MOUNTING
Refer to the outline drawing at the end of the manual for mounting dimensions.
Note: The LCD is made of glass. Handle it with care.
1.1 Display Unit
The display unit may be flush mounted in a panel or on a desktop, using the optional bracket. Display tilt can be chosen from 9° or 20°, by the location of the mounting plate.
When selecting a mounting location, keep in mind the following points:
•Locate the unit out of direct sunlight.
•Select a location where the display can be easily viewed and the controls can be easily operated.
•Leave sufficient space around the unit for servicing and maintenance. See the outline drawing for recommended servicing space.
•The unit weighs 35.3 lbs (16 kg). Be sure the mounting location is strong enough to support the weight of the unit.
•Locate the unit away from areas subject to water splash and rain.
Flush mounting
See the outline drawing at the end of the manual for mounting dimensions.
CAUTION
Hold the cover and display unit together when lifting the display unit.
The display unit may fall if only the cover is held.
1.Using the paper template supplied in the installation materials, make a cutout in the mounting location. (Modification of the LCD may be necessary depending on equipment used. See “Modification for Switching from Landscape to Portrait Orientation” in the Appendix for details.)
2.Pull the display unit cover toward you to detach it.
1
