Furuno Sc 50 manual Installing the Display Unit, Desktop, overhead mounting, Flush mount

1. INSTALLATION

1.4Installing the Display Unit

1.4.1Desktop, overhead mounting

1.Fasten the hanger to the mounting location with four tapping screws (supplied). See the outline drawing for mounting dimensions.

2.Screw the knobs into the display unit.

3.Set display unit to the hanger and tighten the knobs.

4.Run the ground wire between the ground terminal on the display unit and the ship’s superstructure.

DesktopOverhead

Display unit mounting methods

1.4.2Flush mount

Two types of flush mounts are available. See the outline drawing at the back of the manual for details.

Flush mount “F”
Flush mount “F” kit		Type: OP20-29, Code No: 000-041-405)
	Name		Type	Code No.	Qty
	Cosmetic Panel		20-016-1051	100-251-370	1
	Tapping Screw		5X20	000-802-840	4
	Hex Bolt		M6X12	000-862-127	2
	Spring Washer		M6	000-864-260	2

1.Make a cutout in the mounting location. The dimensions are 183(W) x 92(H) mm.

2.Fasten the cosmetic panel to the display unit with hex bolts and spring washers.

3.Fasten the display unit to the mounting location with tapping screws.

1-15