Furuno Sc 50 manual Tx interval options, IEC, Nmea version options, Heading talker options

2. OPERATION

11.Use the Omnipad to choose the baud rate of the equipment connected and then press the [ENT] key.

12.INTERVAL is selected; press the [ENT] key.

25ms

100ms

200ms

1S

2S

Tx interval options

13.Use the Omnipad to choose appropriate output interval and then press the [ENT] key.

14.Choose IEC VERSION and then press the [ENT] key.

IEC ED1

IEC ED2

NMEA 1.5

IEC, NMEA version options

15.Choose appropriate IEC (or NMEA) edition and then press the [ENT] key.

16.Choose HDG TALKER and then press the [ENT] key.

GP

HE

HN

HC

Heading talker options

17.Choose appropriate heading talker and then press the [ENT] key.

GP: GPS navigator talker

HE: North-seeking gyrocompass talker

HN: Non-north seeking gyrocompass talker

HC: Magnetic compass talker

18.Press the [DISP] key to close the menu, or press the [MENU] key to return to the I/O SETUP menu to setup another output port.

2-11