Furuno Sc 50 manual Alarm Setup, Alarm menu, Buzzer options, Dgps alarm options

2. OPERATION

2.5Alarm Setup

The SC-50 can alert you with audible and visual alarms when GPS signal, DPGS signal and WAAS signal are lost. To set the DGPS alarm, do the following:

1.Press the [MENU] key to show the menu.

2.Choose ALARMS and then press the [ENT] key.

ALARMS

BUZZER : LONG

DGPS : OFF

Alarm menu

3. BUZZER is selected; press the [ENT] key.

SHORT

LONG

CONSTANT

Buzzer options

4. Use ▲ or ▼ to choose buzzer type desired and then press the [ENT] key.

SHORT:	Two short beeps
LONG:	Three long beeps
CONSTANT:	Continuous beep

5.Press the [ENT] key.

6.DPGS is selected; press the [ENT] key.

OFF

ON

DGPS alarm options

7.Use ▲ or ▼ to choose OFF or ON as appropriate.

8.Press the [ENT] key.

9.Press the [DISP] key to close the menu.

2-6