Furuno Sc 50 manual Choosing mounting method, Main menu, Installation setup menu

1. INSTALLATION

1.6.2Choosing mounting method

1. Turn on the processor unit and then press the [MENU] key to show the menu.

MAIN MENU

ALARMS

MESSAGES GPS SETUP SYS SETUP SOFT VER.

OTHERS

SATELLITE WAAS/DGPS I/O SETUP INST MENU ERASE TRIP MENU

Main menu

2. Use the Omnipad () to choose “INST MENU” and then press the [ENT] key.

INSTALLATION SETUP

MOUNTING : WALL

DIRECTION : A

LANGUAGE : ENG

ROLL OFFSET : 0.0

PITCH OFFSET : 0.0

Installation setup menu

3. “MOUNTING” is selected; press the [ENT] key.

4. Use the Omnipad to choose the mounting method: “FLOOR”, “WALL” or “INVERT” as appropriate.

5. Press the [ENT] key.

6. “DIRECTION” is selected; press the [ENT] key.

7. Use the Omnipad to choose mounting direction (“A ”, “B ”, “C” or “D”) as appropriate. Refer to section 1.3.

8. Press the [ENT] key.

1-21