2. OPERATION
2.12TRIP Menu
The TRIP menu functions to
•Choose the indication to show on the SOG/STW display
•Choose source of distance run
•Reset distance run to zero
•Smooth the tide drift indication
•Enter smoothing for rate of turn and display range scale
1.Press the [MENU] key to display the main menu.
2.Choose TRIP MENU and then press the [ENT] key.
TRIP MENU 
DISTANCE DISP : DSTNC
DISTANCE CALC: GPS
RESET DISTANCE?
DRIFT AVG : 10SEC
SMOOTH ROT: 2.5 SEC
ROT RANGE: 60/MIN
TRIP menu
3.Choose DISTANCE DISP and then press the [ENT] key.
4.Choose what to display on the Speed display; distance run (DSTNC) or tide direction and speed (DRIFT). Press the [ENT] key.
5.Choose DISTANCE CALC and then press the [ENT] key.
6.Choose the source for distance run; GPS, VLW (distance traveled through water) or VBW (Dual ground/water speed). (VLW requires
7.Choose DRIFT AVG. and then press the [ENT] key.
8.If tide current and speed data is unstable, enter a smoothing figure to stabilize the data. The higher the figure the more smoothed the data. A setting between 0 (no smoothing) and 9999 (seconds) is available.
9.Choose SMOOTH ROT and then press the [ENT] key.
10.Use the Omnipad to enter rate of turn smoothing rate. Choose location with ◄ or ►; change value with ▲ or ▼. The setting range is 0.1 to 30.0 (seconds).
11.Press the [ENT] key.
12.Choose ROT RANGE and the press the [ENT] key.
13.Choose the range of the ROT graph from among 30, 60 and 90 (degree/min.) and then press the [ENT] key.
14.Press the [DISP] key to close the menu.
