Furuno Sc 50 manual Input/Output Ports, AP-8, Port Terminal Name Signal Remarks Label

APPENDIX

3. Input/Output Ports

Port	Terminal Name	I/O	Signal	Remarks
Label
DATA	WAGO	O	Heading,	IEC61162(NMEA0183) or AD-10 format
OUT1	231-304/026-000		Speed,	(software)
			Course,	IEC61162-1 (NMEA0183) Ver1.5, 2.0
DATA	WAGO	O
OUT2	231-304/026-000		Position,	IEC61162-2
DATA	WAGO	O	and	Talker: GP, HE, HN,HC ( HDT, HDM, ROT
OUT3	231-304/026-000		Time	selectable; other sent. GP only)
				Speed: 4800, 9600, 19200, 38400 bps
DATA	WAGO	O
				IEC61162 sentences: HDT, HDM, ROT, VTG,
OUT4	231-304/026-000
				GGA, GLL, GNS, ZDA, VHW, VBW, VDR
DATA	WAGO	O
				( on/off by menu )
OUT5	231-304/026-000
				IEC61162 (NMEA0183) : sentence output
				interval : HDT, HDM, ROT : (25ms, 100ms,
				200ms, 1s, 2s, selectable), VTG, GGA, GLL,
				GNS, ZDA, VHW, VBW, VDR : (1s, 2s,
				selectable)
				ATT sentence
				Proprietary sentence or FURUNO sentence
				Only P sentence : output rate of 25ms,
				100ms,200ms, 1s, 2s, selectable
				ATT sentence – True heading, pitching, rolling
				$PFEC,GPatt,xxx.x, +xx.x, +xx.x<CR><LF>
				( IEC61162-1 (NMEA0183) Ver1.5 )
				$PFEC,GPatt,xxx.x, +xx.x,
				+xx.x*hh<CR><LF>
				(IEC61162-1 (NMEA0183) ver 2.0,
				IEC61162-2)
				HVE sentence
				Proprietary sentence or FURUNO sentence
				Only P sentence : output rate of 25ms,
				100ms,200ms, 1s, 2s, selectable
				HVE sentence – heave by wave
				$PFEC,GPhve,xx.xxx,A<CR><LF>
				( IEC61162-1 (NMEA0183) Ver1.5 )
				$PFEC,GPhve,xx.xxx,A *hh<CR><LF>
				(IEC61162-1 (NMEA0183) ver 2.0,
				IEC61162-2)
				AD-10 output interval :25ms
				Sinal level : IEC61162
				Heading data selected in the tech menu is
				output.

AP-8