TUNER
LISTENING TO THE TUNER
To select one of the available tuner bands:
•Press the Tuner key to select input from each of the follow-
ing in turn: AM, FM, VHF or SiriusXM (requires optional Sirius tuner module
Tuner
TUNER SOURCE SCREENS
AM/FM/VHF
An example of a typical tuner input source screen is shown in Figure 2 below.
Figure 2 – Example AM band input source screen
Input Source name
Current time |
|
|
| Signal strength |
|
|
Selected frequency (or
channel for VHF)
Tuning mode
Tel mute
Use this option to control which action is taken when the 700 Series is connected to a cellphone
To change the Tel mute setting:
1.Press the Menu key.
2.Turn and then press the Encoder to select Settings > Tel mute.
3.Turn the Encoder to select the required option:
•Mute. Mutes the audio output from the 700 Series when a call is received on your cellphone.
•Aux. Allows the received call to be broadcast through the Auxilary input on the 700 Series.
Note: This feature may not operate all available
4.Press the Rotary Encoder to save the setting and exit.
5.Press any key to exit
Tuner region
Use this option to select the correct region .
To change the tuner region setting:
1.Press the Menu key.
2.Turn and then press the Rotary Encoder to select Settings > Tuner region.
3.Turn the Rotary Encoder to select the required region.
4.Press the Rotary Encoder to save the setting and exit.
5.Press any key to exit
VHF region
Use this option to select the correct VHF tuning region.
To change the VHF region setting:
1.Press the Menu key.
2.Turn and then press the Rotary Encoder to select the Settings > VHF region.
3.Turn the Rotary Encoder to select the required region.
4.Press the Rotary Encoder to save the setting and exit.
5.Press any key to exit
15 | 56 |
