Tuning

Applies

When tuning with this method…

Method

to…

 

 

 

 

Manual

All bands

• Press the Forward or Backward key to step through

 

 

the range of frequencies or channels one at a time.

 

 

• Press and hold down the key for rapid scanning of

 

 

frequencies or channels.

 

 

 

Manual

SiriusXM

• Press the Forward or Backward key to step through

 

 

all channels one at a time.

 

 

 

Category

SiriusXM

• Press the Play / Pause, Forward or Backward key to

 

 

step through the channels in the selected category.

 

 

• Only available when a category is selected in the

 

 

Category menu item. For further details see

 

 

“Category” on page 51.

 

 

 

Auto

AM/FM

• Press the Forward or Backward key to start

 

 

searching for available stations.

 

 

• Press the Play / Pause, Forward or Backward key to

 

 

stop the search.

Scan

VHF

• Scans through preset channels, pausing on a

 

 

channel while it is transmitting.

 

 

• Only available if there are two or more presets

 

 

saved.

 

 

• If there is any background noise, the scan will stop.

 

 

For further details see “Minimizing background

 

 

noise” on page 19.

 

 

• Press the Play / Pause, Forward or Backward key to

 

 

turn scan mode off. For further details see “Turning

 

 

scan mode on” on page 19.

 

 

NOTE: The Scan function is activated from the

 

 

settings menu, see ‘Setting up VHF’

 

 

 

Preset

All bands

• Press the Forward or Backward key to step through

 

 

available presets.

 

 

• Only available if there are two or more presets

 

 

saved.

 

 

• To tune to a specific preset:

 

 

a. Press the Menu key, and then press the

 

 

Encoder to select Presets.

 

 

b. Turn the Encoder to highlight the required

 

 

preset.

 

 

c. Press the Encoder to tune to the highlighted

 

 

preset.

 

 

For further details, see “Adding and Removing Presets”

 

 

on page 18.

 

 

 

2.(if required) turn and then press the Encoder to select Parental > Unlock. Enter your access code.

3.Select the Lock/Unlock menu item.

4.Turn the Encoder to highlight a channel then press the Encoder to

lock ( ) or unlock ( ) the channel, as required.

5.Press the Menu key (or leave to time out) to exit.

Channel Skipping

Channel skipping gives the user the ability to set a channel to be skipped / missed while navigating via the Forward and Back key in the Sirius Source Screen. The user still able to navigate to a skipped channel via the channel list found in the menu.

To set or unset a channel from being skipped:

1.Press the Menu key.

2.(if required) turn and then press the Encoder to select Parental > Unlock. Enter your access code.

3.Select the Skip/UnSkip menu item.

4.Turn the Encoder to highlight a channel then press the Encoder to turn on

( ) or turn off ( ) skip, as required.

5.Press the Menu key (or leave to time out) to exit.

ADVANCED SETTINGS

The settings described in this section are usually set up when the unit is installed and not changed again.

Menu key

Rotary

 

Encoder

 

 

Sub filter

Use the sub filter setting to control the sub-woofer cutoff frequency. Audio signals above the selected frequency will not be passed on to the sub-woofer. The sub filter settings apply to all sub-woofer outputs.

17

54

Page 18
Image 18
Fusion MS-IP700, MS-AV700 specifications Channel Skipping, Sub filter, To set or unset a channel from being skipped