CHANGING USB FLASH DRIVE SETTINGS
Press | Turn Rotary | Press Rotary | Menu exit. See |
Menu key | Encoder to | Encoder to change | “Menu Key |
| highlight Repeat | the settings as | Operation” on |
| or Shuffle. | described below. | page 6. |
To change a highlighted setting in the USB settings menu:
1.Press the Encoder to toggle the value on or off.
Repeat
•
Repeat mode is turned off.
•
Repeat the current selection.
Shuffle
•
Random play shuffle is turned off.
•
Shuffle tracks in the current folder.
MS-IP700 model
Note: If you select iPod or USB input without first inserting the device, the message “Not connected” is displayed on the screen.
Before inserting iPod
To avoid damage and ensure safe operation, please read the following information before using your iPod.
•Please ensure iPod dock connector is clean, dry and free from damage.
•Check that the unit’s iPod dock is free from obstructions.
•Insert correct sleeve combination to match your iPod (never insert iPod without the correct sleeve).
•Ensure iPod is inserted with display facing upwards.
•Never force your iPod into the dock, if the iPod does not mate with reasonable ease, the sleeve/iPod combination is most likely incorrect.
•Take care when removing iPod from unit as surfaces may be warm.
To insert your iPod or USB flash drive:
1.Press the door catch and open the control panel door.
Press the |
|
door catch | Open |
27 | 44 |
