SETTING AND CLEARING THE ALARM
Use alarm mode to turn on the 700 Series at a
When the alarm is activated, your 700 Series will play the last selected input source at the volume level in use when the unit was turned off.
Menu key | Encoder |
|
|
To set the alarm:
1.Press the Menu key.
2.Turn and then press the Rotary Encoder to select Settings > Clock > Set alarm.
3.Do one or both of the following:
•Turn the Rotary Encoder to change the hour setting.
•Press the Rotary Encoder to move to the minutes field. Adjust the minutes setting as required.
•Press the Rotary Encoder to move to the AM/PM field (if enabled). Turn encoder to select AM or PM.
4.Press the Menu key to save the time settings and exit (the time out feature does not operate here).
5.Highlight the Alarm enabled checkbox and press the Encoder to enable it ( 
).
6.Press any key to exit
To clear the alarm:
1.Press the Menu key.
2.Turn and then press the Rotary Encoder to select Settings > Clock.
3.Highlight the Alarm enabled checkbox and press the Rotary Encoder to disable
it ( 
).
4.Press any key to exit
APPENDICES
TROUBLESHOOTING
Problem | Solution |
|
|
General |
|
|
|
The unit does | • Reset the unit by pressing the Reset button inside the control panel door. |
not respond to |
|
key presses. |
|
Reset
Button
What is the best | As with all products with a chrome finish exposed to the harsh marine |
way to prevent | environment, a little care will help to preserve the finish and prevent cor- |
corrosion on | rosion. FUSION recommends that you clean any salt water and/or salt |
my 700 Series | residue from the front panel with a damp cloth soaked in fresh water. |
chrome finish? |
|
|
|
iPod |
|
Why do I get an | Some iPhone models may intermittently display the message: “This ac- |
error message | cessory is not made to work with the iPhone. Would you like to turn on |
when I dock my | airplane mode to reduce audio interference? You will not be able to make |
iPhone to my | or receive calls.” when initially docked with any FUSION iPhone compat- |
FUSION iPod | ible product. All FUSION |
inside product? | and certified by Apple, and passed Apple’s stringent “Works with iPhone” |
| |
| Despite this message, all FUSION |
| functional and compatible with Apple’s iPhone product line. |
| Please choose “NO”, or simply wait for this message to time out. |
|
|
My Head unit | This could be happening due to corrupt files and/or a corrupted version of |
keeps turning | the operating software on your iPod. If you connect to your computer you |
itself off then | may get a message on the iPod similar to this: “The iPod ‘John’s iPod’ could |
back on when | not be updated because the firmware was corrupt. |
connected to my | Click this link to get a |
iPod | apple.com/kb/ts1813.” |
|
|
13 | 58 |
