Select the Internal amplifier on menu item | Fusionbrands MS-IP700i

Important: If a Zone is disabled, you cannot change any of the following settings for that Zone.

Disable Internal Amplifiers

Disable the internal amplifiers for Zones 1 and 2. For example, if external amplifiers are used for Zones 1 and 2 the internal amplifiers can be disabled to reduce power consumption.

To enable or disable the internal amplifiers for Zones 1 and 2:

1.Press the Menu Key.

2.Turn and press the Encoder to select Settings > Zone.

3.Select the Internal amplifier on menu item.

4.	Press the Encoder to disable (	) or enable (	) the amplifiers
5.	Press any key to exit

Volume control

Zones 3 and 4 can have volume control disabled. You should disable volume control for a Zone that has its volume controlled from another amplifier or Head unit. If volume control is:

•Enabled: turning the Encoder will change line level output for the selected Zone only.

•Disabled: turning the Encoder will not change line level output for the selected Zone.

To enable or disable volume control:
a. Select the Volume Control menu item.
b. Press the Encoder to enable (	) or disable (	) volume control.
c. Press any key to exit

Link to zone 1

Zones 1 and 2 can be linked so that any volume or sub-woofer level changes are applied to both Zones. A small “+” sign is displayed on screen between Zones 1 and 2 when this feature is enabled.

To link Zone 2 level to Zone 1 level:

a.Select the Link to zone 1 menu item.

b.Press the Encoder to link the two Zones ( ) or unlink ( ) the Zones.

c.Press any key to exit

37

Image 38

Fusionbrands MS-IP700i, MS-AV700i To enable or disable the internal amplifiers for Zones 1, Volume control, Link to zone

Contents

Series Manual USB Flash Drives Using iPodCare and Maintenance Handling CD or DVD disc’s MS-AV700i model only Register Your Product Online Contents Page Brightness User Interface and ControlsMute Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menus Adjusting levels Accessing Menus Getting Started To power the unit on or offOpening Control Screens Adjusting Volume Level Zone 1 Zone 2 Zone 3 Zone 4 All Zones To adjust the volume levelTo mute and unmute the volume To set sub-woofer levels or tone Clock To set the alarm To clear the alarm To adjust the brightness of the display screen To select one of the available tuner bands Tuner To tune to a required frequency, channel or preset SiriusXM Turn scan mode off. For further details see Turning Scans through preset channels, pausing on aOnly available if there are two or more presets Scan mode on on To remove one or more presets Playing Music Content Turning scan mode on Controlling iPod Playback Selecting tracks from a playlistControlling Playback Initial Song Title Loading From MTP Devices Music Folder Structure Selecting audio tracks from a MTP media device Repeat Browsing Music Collections Over Bluetooth Not SupportedTo change a setting in the iPod settings menu Shuffle To listen to input from an auxiliary device Auxiliary Input Additional Features Examples of auxiliary input source screens Ethernet Support DVD source selected Change source Volume Up / DownMS-AV700i model only Random / Shuffle DVD source not selected Following keys work for the SiriusXM source Installing the 700 Series Dimensions side view MS-IP700i iPod/iPhone video only, MS-AV700i DVD video only ConnectionsConnect an AM/FM marine antenna Zone 4 Line Out Black wire Low level output Zone 2 Line Out White wire Low level outputZone 3 Line Out Grey wire Low level output White RCA = Left Output Zone Installation MS-IP700i or MS-AV700i To enable or disable the selected Zone Selecting and setting up a zoneEnabled For further details, see instructions below To enable or disable volume control To enable or disable the internal amplifiers for Zones 1Volume control Select the Internal amplifier on menu item You can access the screen Volume limitTo specify the volume limit for the selected Zone Sub-woofer level When using your music device with either model To enter the name for the selected Zone To insert your iPod Open To connect your USB flash drive, you will need MS-AV700i and MS-IP700i ModelsTo connect your iPod, you will need MS-UNIDOCK Tuner Region Australasia-Europe-Japan Connecting auxiliary deviceTuner Region USA Settings Clock Set clock Adjusting Auxiliary input levelRecommended settings are listed below To set the clock Activating your SiriusXM tuner To select 12 or 24 hour clock display modeEnabling the SiriusXM Source See To select a channel SiriusXM menu optionsChannels To select a Category Padlock iconCategory To enter Parental menu Parental modeTo change the Parental mode access code To access a locked channel Channel Locking / unlocking To lock or unlock a channel Sub filter Power save To change the sub filter settingTo enable or disable the key sound To enable or disable power saving mode To change the VHF region setting To change the Tel mute settingTo change the tuner region setting Tel mute Set Aux name To enable or disable the AM of VHF tuner sourcesAccessory Shared BT-200 Bluetooth & SiriusXM Source Set device name To reset your 700 Series to factory default values Internet Protocol IP Setting 700 Series OnlyFactory Reset Static IP Address Appendices Problem Solution GeneralProblem Solution SiriusXM Problem Solution Bluetooth ‘Channel Unsubscribed’ Problem Solution IPod/iPhone? Problem Solution MTP Device Problem Solution Wireless Remote App for iPad and iPhone Specifications General specificationsTuning range FCC compliance statement Japan VHF tuning rangeSUPPORT, Sales and Service Licensing Auxiliary input SeriesAndroid MTP Channels Keys PresetsRemote controls Menus Sub-woofer level SettingsSource screens Tuner Zones VolumeUSB flash drive Page Page MAN000001G