MS-IP700i MODEL

Note: If you select iPod, MTP or USB input without first connecting the device, the message “Not connected” is displayed on the screen.

Important Note: Connecting Supported iPods and iPhones to a MS-IP700i Stereo

The MS-IP700i provides two connection options for iPod and iPhone users. Supported devices may be either inserted into the internal dock or connected to the external USB connector.

Note: The internal dock does not support MTP devices and Apple devices featuring an Apple Lightning connector. An external FUSION MS-UNIDOCK is recommended for this purpose.

The MS-IP700i Stereo does NOT support multiple iPod or iPhone devices connected simultaneously. Correct operation is only guaranteed with a single iPod/iPhone device connected.

Before connecting iPod

To avoid damage and ensure safe operation, please read the following information before using your iPod.

Please ensure iPod dock connector is clean, dry and free from damage.

Check that the unit’s iPod dock is free from obstructions.

Insert correct sleeve combination to match your iPod (never insert iPod without the correct sleeve).

Ensure iPod is inserted with display facing upwards.

Never force your iPod into the dock, if the iPod does not mate with reasonable ease, the sleeve/iPod combination is most likely incorrect.

Take care when removing iPod from unit as surfaces may be warm.

Do not use a sleeve or cover on the Apple device.

To insert your iPod:

1. Press the door catch and open the control panel door.

Press the

 

door catch

Open

40

Page 41
Image 41
Fusionbrands MS-AV700i, MS-IP700i manual To insert your iPod, Open