FCC compliance statement, Tuning range | Fusionbrands MS-IP700i

SPECIFICATIONS

FCC compliance statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

•this device may not cause harmful interference, and

•this device must accept any interference received, including interference that may cause undesired operation.

General specifications

Operating voltage	10.2–16 VDC negative ground
Fuse rating	15 amp
DVD player
Laser power	Class I
Power output
Maximum	70 W x 4
26 WRMS per channel at 4 ohms
45 WRMS per channel at 2 ohms
Pre-output voltage	3 VRMS

Auxiliary input sensitivity

The 700 Series AUX input sensitivity is 1V RMS when gain is set to 0dB.

•Increasing the gain by 6dB doubles the input sensitivity (0.5V RMS for same volume).

Tuning range

Europe and Australasia

FM radio frequency range 87.5– 108 MHz.

Frequency step 100 kHz

AM radio frequency range 522– 1620 MHz.

Frequency step 9 kHz

USA

FM radio frequency range 87.5– 107.9 MHz.

Frequency step 200 kHz

AM radio frequency range 530– 1710 MHz.

Frequency step 10 kHz

59

Image 60

Fusionbrands MS-IP700i manual FCC compliance statement, General specifications, Auxiliary input sensitivity, Tuning range

Contents

Series Manual Using iPod Care and MaintenanceUSB Flash Drives Handling CD or DVD disc’s MS-AV700i model only Register Your Product Online Contents Page User Interface and Controls MuteBrightness Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menus Adjusting levels Accessing Menus To power the unit on or off Opening Control ScreensGetting Started Adjusting Volume Level To adjust the volume level To mute and unmute the volumeZone 1 Zone 2 Zone 3 Zone 4 All Zones To set sub-woofer levels or tone Clock To set the alarm To clear the alarm To adjust the brightness of the display screen To select one of the available tuner bands Tuner To tune to a required frequency, channel or preset SiriusXM Scans through preset channels, pausing on a Only available if there are two or more presetsTurn scan mode off. For further details see Turning Scan mode on on To remove one or more presets Playing Music Content Turning scan mode on Selecting tracks from a playlist Controlling PlaybackControlling iPod Playback Initial Song Title Loading From MTP Devices Music Folder Structure Selecting audio tracks from a MTP media device Browsing Music Collections Over Bluetooth Not Supported To change a setting in the iPod settings menuRepeat Shuffle To listen to input from an auxiliary device Auxiliary Input Additional Features Examples of auxiliary input source screens Ethernet Support Change source Volume Up / Down MS-AV700i model onlyDVD source selected Random / Shuffle DVD source not selected Following keys work for the SiriusXM source Installing the 700 Series Dimensions side view Connections Connect an AM/FM marine antennaMS-IP700i iPod/iPhone video only, MS-AV700i DVD video only Zone 2 Line Out White wire Low level output Zone 3 Line Out Grey wire Low level outputZone 4 Line Out Black wire Low level output White RCA = Left Output Zone Installation MS-IP700i or MS-AV700i Selecting and setting up a zone EnabledTo enable or disable the selected Zone For further details, see instructions below To enable or disable the internal amplifiers for Zones 1 Volume controlTo enable or disable volume control Select the Internal amplifier on menu item Volume limit To specify the volume limit for the selected ZoneYou can access the screen Sub-woofer level When using your music device with either model To enter the name for the selected Zone To insert your iPod Open MS-AV700i and MS-IP700i Models To connect your iPod, you will needTo connect your USB flash drive, you will need MS-UNIDOCK Connecting auxiliary device Tuner Region USATuner Region Australasia-Europe-Japan Adjusting Auxiliary input level Recommended settings are listed belowSettings Clock Set clock To set the clock To select 12 or 24 hour clock display mode Enabling the SiriusXM SourceActivating your SiriusXM tuner See SiriusXM menu options ChannelsTo select a channel Padlock icon CategoryTo select a Category Parental mode To change the Parental mode access codeTo enter Parental menu To access a locked channel Channel Locking / unlocking To lock or unlock a channel Sub filter To change the sub filter setting To enable or disable the key soundPower save To enable or disable power saving mode To change the Tel mute setting To change the tuner region settingTo change the VHF region setting Tel mute To enable or disable the AM of VHF tuner sources Accessory Shared BT-200 Bluetooth & SiriusXM SourceSet Aux name Set device name Internet Protocol IP Setting 700 Series Only Factory ResetTo reset your 700 Series to factory default values Static IP Address Problem Solution General Problem Solution SiriusXMAppendices Problem Solution Bluetooth ‘Channel Unsubscribed’ Problem Solution IPod/iPhone? Problem Solution MTP Device Problem Solution Wireless Remote App for iPad and iPhone General specifications Tuning rangeSpecifications FCC compliance statement VHF tuning range SUPPORT, Sales and ServiceJapan Licensing Series Android MTPAuxiliary input Channels Presets Remote controlsKeys Menus Settings Source screensSub-woofer level Tuner Volume USB flash driveZones Page Page MAN000001G