Fig. 25 |
The last programmed value is proposed to you every other time you program a short time.
Short time
You can program a period of time with the short time function without automatic activation or deactivation. You can use this mode of operation even when the appliance is switched off as an egg timer, for example. The range that can be set is between ten seconds (00:10) and 23.59 hours (23:59)
Proceed as follows:
–Press the + key. The short time symbol 
flashes (Fig. 25).
–The entered value appears on the display, which you can modify by pressing the + or – key. The time unit symbol 
lights up.
–Press the 
(Confirm) key to confirm the entered value.
–The elapsing time is displayed.
Note: if nothing is entered for 5 seconds, the short time starts even if the 
key (Confirm) is not pressed.
Once the short time has elapsed, an audible signal sounds and the 
(Short time) symbol flashes on the display. The signal goes off when you press any key. The short time reminder can be switched off at any time by pressing the + and – minus keys at the same time.
Fig. 26 |
Elapsing timer
Proceed as follows:
–Press the – key while the appliance is on (Fig. 26).
–The time, beginning at 00:00, is displayed (maximum display: value 12 hours).
Thus, you can continuously display the elapsed cooking time without programming automatic deactivation.
When you press the – key again, the time is switched off.
14
