3.5 Entering the water hardness |
|
| |||
| End |
| If the hardness of the water in your household | ||
|
| deviates from the value that is set at the works | |||
| Options menu |
| |||
|
|
| (water hardness range 4), you must enter the | ||
| Temperature | 0 | right water hardness in the options menu for | ||
Descaling | commencing operation of the appliance. | ||||
display in |
| ||||
| ° C / ° F |
| Proceed as follows: | ||
|
|
| |||
|
|
| – Turn the two control knobs to the topmost | ||
|
|
| position. |
| |
Start | Time display |
| – Press the | (Confirmation) key and keep it | |
Calibration | 24h / 12h (AM/PM) |
| pressed. |
| |
|
|
| |||
|
|
| – Turn the “Moisture level” knob to the right. |
Fig. 10 | Time display | – Release the (Confirmation) key. | |
ON/OFF |
| ||
(only if appliance is switched off) | – The various options appear on the display. Turn | |
| ||
| the “Moisture level” control knob to the right to | |
| the descaling position. | |
| – With the + and – keys, set the water hardness | |
| (between 1 and 4) (Fig. 11). | |
| – Press the | (Confirmation) key. |
| – To quit the options menu, turn the “Moisture” | |
| control knob back up or turn the “Temperature” | |
| control knob. | |
Fig. 11 |
|
|
12
