5.6Display of the current cooking compartment temperature (ThermoTest)
Fig. 28 |
When you press the 
(Confirmation) key, the current temperature in the cooking compartment and the moisture level appears on the display for a few seconds (Fig. 28).
Note: if the appliance is operated for a prolonged period unavoidable temperature fluctuations of up to 5 °C / 10 °F may occur.
When the setting 100 °C / 210 °F and 100 % humidity has been selected the appliance will heat until boiling point. The boiling point is dependent on the position above sea level and is usually, in fact, below 100 °C / 210 °F . In order to steam at boiling point you must select 100 °C / 210 °F .
5.7 Power failure protection
When the steam oven is on, heating is interrupted if the power should fail and if it should then return again.
Note: the appliance bridges a power failure lasting 5 minutes. The cooking process can be continued unhindered. A prolonged power failure may have a negative influence on the cooking process. This is why cooking stays interrupted. You must switch the appliance off and then on again.
5.8 Holiday protection
5.9 Cleaning aid
For your protection, the appliance features holiday protection. Every heating operation is switched off after 15 hours if the appliance is not operated during this time. Dashes appear on the display. Turn the two control knobs to 0. You can then operate the appliance in the way to which you are accustomed. This function is not active when a time has been programmed.
The cleaning assistance feature loosens soiling, which can then be removed with greater ease (see Chapter 9.3).
25
