Step 2: Install the Edge
For the best GPS reception, position the bike mount so the front of the Edge is oriented toward the sky. You can install the bike mount on the stem or the handlebars. The stem installation (shown here) provides a more sturdy location. The optional wedge should be used under the mount for a better viewing angle.
To install the Edge on your bike stem:1.Place the wedge on the bike stem, and then place the bike mount on the wedge. Make sure the release lever is on the left.
Getting Started
Wedge
Release(optional)
lever
Bike mount
For horizontal bars: Separate and remove the top part of the mount, turn it 90 degrees, and replace it.
Continue with step 2.
For bars with a diameter less than 1 in (25.4 mm): Place the additional rubber pad under the bike mount to increase the diameter of the bar. The rubber pad also prevents the mount from slipping. Continue with step 2.
2.Attach the bike mount securely using two cable ties. Make sure the cable ties are threaded through both parts of the bike mount.
Edge 605/705 Owner’s Manual | 5 |