Garmin Edge 605 manual 46

Using Accessories

GSC 10

Pedal magnet

Spoke magnet

Sensor arm

indication line

GSC 10 and Magnet Alignment

pedal magnet must line up with the indication line on the GSC 10.

3.Unscrew the spoke magnet from the plastic piece. Place the spoke in the groove of the plastic piece and tighten slightly. The magnet can face away from the GSC 10 if there is not enough room between the sensor arm and the spoke.

The magnet must be aligned with the sensor arm indication line.

4.Loosen the screw on the sensor arm and move it to within 5 mm of the spoke magnet. You can also tilt the GSC 10 closer to either magnet for improved alignment.

40 Edge 605/705 Owner’s Manual