GarrettCom manual Magnum 500-Series AC power connector

Magnum 500-Series Switching Hubs Installation and User Guide (08/98)

Screw holes

Rectangular cut-out (Air Vent)

Switching Hub

Magnum 528

GARRETT

RX	8
	7

10 4 5 6

3

		2
	K	1
TO	LIN
AU

RX	2
	1

LIN K

1 0

PW R

Figure 3.1.3 : Magnum 528 mounted on E-stand

3.2Powering the Magnum 500-Series Switch

Magnum 500-Series Switching Hubs incorporate an internal universal power supply, and have a recessed male IEC connector for the AC power cord at the right-rear. A six-foot 115 VAC 60 Hz standard power cord is supplied with each unit shipped within the United States and Canada.

115-230V~ 50/60 Hz

Figure 3.2: Magnum 500-Series AC power connector

The Magnum 500’s auto-ranging power supply supports installation environments where the AC voltage is from 90 to 260 volts with a power input frequency between 47 and 63 Hz. The unit will consume just under 10 watts of power typically.

When connecting the Ethernet cabling, there is no need to power down the unit. Individual segments can be connected or disconnected without concern for AC power-related problems or damage to the unit.

GARRETT

16