Magnum 500-Series Switching Hubs

Installation and User Guide (08/98)

 

 

1.2Ordering Information

Magnum 500-Series Switching Hubs

MODEL

DESCRIPTION

Magnum 528

Switching Hub, eight ports at 10Mb F/H plus two 100Mb

 

Fast Ethernet ports (F/H and 10/100). Self-learning 2K

 

node-capacity address table, Store and Forward operation

 

to filter all errored frames, full wire-speed filtering and

 

forwarding among all ports. Up-link switch on 10Mb port

 

# 8. Internal auto-ranging power supply.

 

(The copper Fast Ethernet ports can be manually set to

 

the desired mode, or may optionally be set for support of

 

10/100 and F/H IEEE 802.3u standard auto-negotiation).

Magnum 528F-SC

Same as Model 528, but with a 100BASE-FX fiber port,

 

multi-mode SC connector, and a 100Mb RJ-45 port.

Magnum 528F-ST

Same as Model 528, but with a 100BASE-FX fiber port,

 

multi-mode ST connector, and a 100Mb RJ-45 port.

Magnum 528F-SMSCSame as Model 528, but with a 100BASE-FX fiber port, single-mode SC connector, and a 100Mb RJ-45 port.

Magnum 528F-SMSTSame as Model 528, but with a 100BASE-FX fiber port, single-mode ST connector, and a 100Mb RJ-45 port.

Magnum 508

Same as Model 528 but without the 2 Fast Ethernet ports

.

Eight 10Mb switched ports (no 100Mb ports)

Garrett Communications reserves the right to change specifications, performance characteristics and/or model offerings without notice.

GARRETT

3

Page 8
Image 8
GarrettCom 500-Series manual Ordering Information, Magnum 528F-SC, Magnum 528F-ST