
Magnum   | Installation and User Guide (08/98)  | 
  | 
  | 
4.2Status LEDs
For all Magnum 
PWR | : Power LED, ON when AC power is applied to the unit.  | 
LK/RX | : Link/Receive LED per 10Mb port, Steady ON for Link, Flashing  | 
  | when the port has Receive activity.  | 
FDX | : Full / Half Duplex LED per 10Mb port, ON when the port has  | 
  | 
For Magnum 528 and 528F models only :
AUTO | :   | 
  | configured to operate in the   | 
  | their speed is internally fixed at 100Mb (no   | 
  | 10Mb speed).  | 
10 LED  | : One for each “100Mb” port, ON when the copper port speed is  | 
  | 10Mb/s.  | 
100 LED | : One for each “100Mb” port, ON when the port speed is 100Mb/s.  | 
F/H  | : Full / Half duplex LED, one for each 100Mb port, ON when the  | 
  | port is running full duplex, OFF for half duplex.  | 
4.3 Manual switches for 10Mb 
FDX  | 
UPLINK  | 
7  | 
Up-link  Switch
LK RX  | 
  | 100 Mb  | 
  | AUTO  | 
PWR  | TX  | 
  | RX  | |
100  | 
  | 
  | 
  | 
  | 
10  | 
  | 
  | 
  | LK  | 
F/H  | 
  | 
  | 
  | RX  | 
  | 
  | 
  | F/H  | |
  | 
  | 
  | 
  | 
F  | H  | F  | H  | 
ST Connector(Magnum 528F only)
PWR  | AUTO  | 
LK/RX  | FDX  | 
100  | 100  | 
10  | 10  | 
F/H  | 1  | 2  | F/H  | 
  | 
  | 
F/H Switch(Magnum 528only)
Figure 4.3 : Up-link  and F/H manual switches on front panel
The unit has a manual 
The two F/H switches are located next to each Fast Ethernet port on Magnum 528’s. When the two Fast Ethernet ports of a Model 528 are set to operate at fixed 100Mb speed (no 
GARRETT 

21