GarrettCom 6K25e manual Four-Port 10 Mb mm Fiber ST Modules

Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07)

(MDIX) feature to eliminate the use of cross-over cable, and the two fiber ports operate at 100Mbps full-duplex (default). User mode control per port through the MNS software is also the same.

On Magnum “4+2” Combo modules, there are four LED’s for each RJ-45 port, which indicate status the same as described for the 6K8-RJ45 in Section 2.2.3 above. The fiber port’s LEDs indicate status the same way as described for the SFF fiber modules in Section 2.2.2 above. Color-coding on the panel of the module shows which LEDs belong to which port.

	1		3	5	7
10/100						LK
F/H						ACT
ACT			ACT
F/H			F/H
2	TX	LK RX	6	TX	LK	RX

The Magnum Combo six- port modules are also available with 4@ MTRJ 100Mb mm SFF fiber and 2@10Mb fiber mm ST ports, and with 4@ RJ45 10/100 copper and 2@10Mb fiber mm ST ports. The

4@ RJ-45 + 2@ 10 Mb ST operation of the SFF fiber and the RJ-45 half of the module is as described for those port types above. For detailed information about 10Mb mm ST fiber half of the module, see Section 2.2.5.

The Magnum Combo

1

3

5

7

six-port modules are also available

10/100

LK

ACT

with 4@ MTRJ 100Mb mm SFF

F/H

fiber and 2@10Mb fiber mm ST

ACT

ACT

F/H

F/H

ports, and with 4@ RJ45 10/100

2

6

TX

LK RX

TX

LK

RX

copper and 2@10Mb fiber mm ST

ports. The 4@ RJ-45 + 2@ 10 Mb ST

operation of the SFF fiber

and the RJ-45 half

of the module is as described for those port types above. For detailed

information about 10Mb mm ST fiber half of the module, please check section 2.2.5.

2.2.7 Four-Port 10 Mb mm Fiber ST Modules

ACT

F/H

1TX LK RX

ACT

F/H

5TX LK RX

ACT			ACT
F/H			F/H	T	LK	R
2	TX	LK RX	6

The 4port @10Mb ST fiber modules behave the same as the 8@100Mb ST

www . GarrettCom . com

13