GarrettCom manual Installing 6KPM Cards in the Magnum 6K25e

Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07)

3.5.2Installing 6KPM Cards in the Magnum 6K25e

Up to four front-mounted 6KPM cards may be installed in one Magnum 6K25e Managed Fiber Switch unit. Follow these steps to install a 6KPM.

Step 1. Remove top chassis cover. See procedure in Section 3.5.1 above.

Step 2. Placed Granddaughter board (as shown in fig. 3.5.2a and 3.5.2b) on the chassis built in stand off (female) provided at the front of the 6K25e Main Board and screw down tightly with the three 5/16 stand-off (male) on the top of the Granddaughter board The 5/16 stand off has been used to place the daughter board on the top of the granddaughter board and latch it securely.

Fig 3.5.2a Granddaughter Board shown separately

Fig 3.5.2b Granddaughter Board placed in slot

A and secured with three 7/16 stand-off’s

Step 3. The figure here illustrates the basic layout of an individual PM card. Each 6KPM card fits into the space provided on the main board.

www . GarrettCom . com

32