GarrettCom 6K25e manual Inspecting the Package and Product, 6KPM Module Description

Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07)

5.1Inspecting the Package and Product

This section applies only to PMs shipped as separate items, i.e., 6K25e PMs not factory installed in a Magnum 6K25e PM slot.

Examine the shipping container for obvious damage prior to installing a 6K25e PM; notify the carrier of any damage you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included.

This package should contain:

1 or more 6K25e PMs

Installation instructions, with illustrations

Remove the 6K25e PM(s) from the shipping container. Be sure to keep the shipping container should you need to ship any of the PMs separately at a later date. In the event there are items missing or damaged, contact your supplier. If you need to return the unit, use the original shipping container if possible. Refer to Chapter 5 for specific return procedures.

5.26KPM Module Description

An important feature of the Magnum 6K25e is the use of Port Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since the Magnum 6K25e Switches have dual-speed capability for copper ports, the 6 or 8-port interfaces are designed to support all standard Ethernet media types at 10 or 100Mps speed. Each 6K25e PM provides six or eight ports for connecting Ethernet segments with its individual connector type and media.

For a list of 6K25e Port Module types, refer to Section 1.2

Each 6K25e PM is individually described in the following sections.

NOTE: The port #1 on the RJ-45 ports on all the modules, either all RJ-45 ports or used for COMBO module is set as (=) other user ports.

www . GarrettCom . com

43