Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.
5.2.1a 6KP6-RJ10ST, 4@10/100Mbps RJ-45 and 2@10Mb multi-mode FX-ST “twist lock” Combo Module
The 6KP6-RJ10ST is a six port combo module that looks similar to the 100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K32T Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full- duplex and half-duplex.
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON, 100Mbps if it is OFF, 10Mbps.
5.2.1b | 6KP4-F10ST, 4@10Mb multi-mode FX-ST “twist lock” Module |
The Magnum 6KP4-F10ST | | | | 6KP4-RJ10MST, | |
is a 10Mb multi-mode | | 4 Port@ 10Mb ST Fiber Port | |
fiber module with 4 ST- | | | | 2 | | | |
Fiber ports. All four fiber | | ACT | | | ACT | | |
ports are ST connectors | | | | | |
| F/H | | | F/H | | 1 |
and configured as 10Mb | 3 | 1 | TX | LK RX | 5 | TX | RX |
ACT | | | ACT | | |
| | | | | | |
Half-duplex by default. | | F/H | TX | LK RX | F/H | LK | RX |
The 10Mb ST-fiber ports | | 2 | 6 T |
| 1 | | LINK | 2 | ACTIVITY |
allow the user to connect | | |
| | | | | | |
their legacy 10Mb network | | 3 | FULL/HALF | | |
to the Magnum 6K32T | | | | | | | |
switch. They also provide a convenient way for the half duplex | | |
hub to connect to the switch through 10Mb fiber ports. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a special order).
www . GarrettCom . com
