GarrettCom Magnum 6K32T Magnum 6KP4, Flstfx is a combo fiber, All four fiber ports are ST

Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).

5.2.1c 6KP4-FLSTFX, 2@10Mb and 2@100Mb multi-mode FX-ST “twist lock” Module

The Magnum 6KP4-				6KP4-RJ10MST,
FLSTFX is a combo fiber		4 Port@ 10Mb ST Fiber Port
module with two 10Mb +				2
two 100Mb multi-mode		ACT			ACT
fiber module and in
		F/H			F/H		1
combine 4 ST-Fiber ports.	3	1	TX	LK RX	5	TX	RX
		ACT			ACT
All four fiber ports are ST		F/H	TX	LK RX	F/H	LK	RX
connectors and configured		2			6 T
		1		LINK	2	ACTIVITY
as 10Mb Half-duplex by
default for 10Mb fiber and		3	FULL/HALF
100Mb Full duplex for the

100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb network to the Magnum 6K32T switch. They also provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single- mode for 10Km distance may be available as a special order).

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).

www . GarrettCom . com

44