Magnum Quad-Series Fiber Switches

Installation and User Guide (06/03)

When connecting the Ethernet cabling, there is no need to power down the unit. Individual segments can be connected or disconnected without concern for AC power-related problems or damage to the unit.

Power supply options are available to suit the Quad-Series Switches to special high-availability communications and/or heavy industrial-grade applications, including:

*-48VDC, 24VDC & 125VDC with single DC input,

*-48VDC, 24VDC & 125VDC with dual-source DC input,

See the Appendices of this manual for more details. Use an RFQ for other variations.

3.9Quad Port Module (QPM) Installation

The Magnum Q-Series Fiber Switches are normally received from the factory

with all required QPM modules installed. There may be situations where QPM cards need to be added or replaced. In cases where additional QPM cards are needed, the face plate for an available front-mounted slot must be removed. The following procedure describes this operation.

3.9.1Preparation for Installing and Removing QPMs

STOP!!!

Be sure the power cord is unplugged

from the chassis before attempting to remove

and/or replace any QPM cards.

Failure to do so may result in damage to the unit

and will void the warranty.

Caution- Avoid Static Discharge: The port modules (like most electronic equipment) are sensitive to static discharge. Use proper ESD measures when handling port modules.

Step 1. Make sure the QPM Card package has all necessary accessories to install it properly. The QPM Card package for field installation comes along with a QPM Card, two 7/16 stand-offs , two #4-40 Pan-Head screws, two #4-40 black color Flat-head screws and two Headers pin.

www . GarrettCom . com

25

Page 31
Image 31
GarrettCom manual Quad Port Module QPM Installation, Preparation for Installing and Removing QPMs