Technical Specifications | GarrettCom Quad specification

Magnum Quad-Series Fiber Switches

Installation and User Guide (06/03)

1.0SPECIFICATIONS

1.1Technical Specifications

Performance
Aggregate Filtering Rate:		2,380,800 frames/sec for 16 100Mbps ports
		(for Magnum QS5116)
(all ports are wire speed)		1,190,400 frames/sec for 8 100Mbps ports
		(for Magnum QS580 & QS5108)
Aggregate Forwarding Rate: (for Magnum QS Fast Ethernet ports)
(all ports are wire speed)		1,190,400 frames per second, 16-port units
		595,200 frames per second, 8-port units
Data Rate:		10 Mbps and 100Mbps
Address Table Capacity:		24K node addresses, self-learning (12K on
		8-port models), with address aging
Packet buffer size :		8 MB dynamic (4MB for 8-port)
Latency:	5 ∝s + packet time (100 to 100Mbps)
	15 ∝s + packet time (10 to 10 Mbps, and 10 to 100Mbps)
Network Standards
Ethernet V1.0/V2.0 IEEE 802.3: 10BASE-T,
IEEE 802.3u: 100BASE-TX, 100BASE-FX
Maximum 10 Mbps Ethernet Segment Lengths
Unshielded twisted pair			-	100 m (328 ft)
Shielded twisted pair			-	150 m (492 ft)
10BASE-FL multi-mode fiber optic			-	2 km (6,562 ft)
10BASE-FL single-mode fiber optic			-	10 km (32,810 ft)
Maximum Standard Fast Ethernet Segment Lengths:
10BASE-T (CAT 3, 4, 5 UTP)			- 100 m (328 ft)
100BASE-TX (CAT 5 UTP)			- 100 m (328 ft)
Shielded twisted pair			-	150 m (492 ft)

100BASE-FX, half-duplex, multi-mode - 412 m (1350 ft)

100BASE-FX, full-duplex, multi-mode - 2.0 km (6,562 ft) 100BASE-SX, short wavelength HDX m.m. - 300 m ( 935 ft)

100BASE-FX, half-duplex, single-mode - 412 m (1350 ft) 100BASE-FX, full-duplex, single-mode - 15.0 km (49,215 ft)

Connectors for copper wiring

Twisted Pair at 10/100Mb: RJ-45 shielded, female, front mounted (for Magnum Quad-Series Fast Ethernet copper ports, use Cat 5 cable)

Fiber Multi-mode connector types:

Fiber Port, SC-type (snap-in): Fiber optic multi-mode, 100BASE-FX

Fiber Port, ST-type (twist-lock): Fiber optic multi-mode, 100BASE-FX

Fiber Port, MTRJ-type (plug-in): Fiber optic multi-mode, 100BASE-FX

Fiber Port, VF-45 type (plug-in): Fiber optic multi-mode, 100BASE-FX

Fiber Port, ST-type (twist-lock): Fiber optic multi-mode, 10ASE-FL

www . GarrettCom . com

1

Image 7

GarrettCom Quad manual Technical Specifications

Contents

Fiber Switches Trademarks Contacting GarrettCom, Inc GarrettCom, Inc Introduction Table of Contents Introduction Magnum QUAD-SERIES QPM Personal Hubs, 10Mb series Personal Switches, 10/100Mb Technical Specifications Agency Approvals Magnum Quad-Series Port Modules Ordering Information Inspecting the Package and Product Magnum Quad-Series chassis models Product Description Magnum Quad-Series Fiber Switches Ports Table-Top Quad-port modules, 10 Mb Quad-port modules, 100Mb fiberFiber QPRJ-MSC Quad-Port Module, RJ-45 copperCombo 3 + 1 Quad Port Modules, 3@RJ-45 and 1@fiber QPM-RJ45 Frame Buffering and Latency Www . GarrettCom . com „ 16-port, 12-port, 8-port and 4-port models Features and Benefits„ Plug-and-Play installation for high performance switching „ Front-mounted LEDs, world-wide AC power supply Example 1 Magnum QS580 Applications Example 2 Magnum 8-port QS5108 Example 3 Magnum 16-port QS5116 Location of 8-port Magnum QS580’s cooling fan exhaust Locating Magnum Quad-Series Switches Copper Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock Ieee Standard Media Type Max. Distance Port Module Fiber Connecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Wall or Vertical Surface Mounting, 8-port QS580 Table-Top or Shelf MountingRack-mounting, models QS5108 and QS5116 Multiple Magnum QS5116 units rack-mounted in a 23 frame Jumper Settings for HDX/FDX Fiber ports, internal jumper settings Combo ports, RJ-45 and Fiber internal jumper settings Www . GarrettCom . com 10Mbps Fiber ports internal jumper settings Powering the Magnum Quad-Series Switch Preparation for Installing and Removing QPMs Quad Port Module QPM Installation 1a Removing Chassis Cover Remove Chassis Cover 1c Front View QPM Retaining Screws hold Face Plates Installing QPM Cards in the Magnum Q-Series 2a Inserting QPM Cards into a Magnum QS5116 3b Removing a QPM Card Removing QPM Cards Filtering and Forwarding Switching FunctionalityAddress Learning ACT Status LEDsAuto-negotiation, for Fast Ethernet copper ports PWR Www . GarrettCom . com Flow-control, Ieee 802.3x standard Auto-negotiation for 10 Mb ports, half- or full-duplex mode Fiber Port Module Product Description Introduction Magnum QUAD-SERIES QUAD-PORT Modules QPM QPM-MST, 100Mb multi-mode FX-ST Quad-port Module, twist lock 100BASE-FX Single-Mode QPM-SSC 100Mbps single-mode FX-SC-type, snap-in connector Small-form-factor QPM-RJ45 Twisted Pair, 10/100Mb TP Quad-Port 10/100BASE-T and 100BASE-FX Combo Quad-Port Connectors 10 Blank Face Plate QPM-FP Before Calling for Assistance Return Material Authorization RMA Procedure When Calling for AssistanceNo Problem Found Power Supply Internal -48 VDC Option B1.0 Specifications for Magnum QUAD-SERIES SwitchesShipping and Packaging Information Power Supply Internal 125 or 100VDC Option Power Supply Internal 24 VDC OptionB3.0 Applications for DC Powered Ethernet Switches B4.1 UL Requirements B4.0 InstallationB5.0 Operation Magnum QS5116-125VDC B6.0 Ordering Information To the external Terminal Block C4.0 Features and Benefits of the DUAL-SOURCE DesignC5.0 Installation C3.0 DUAL-SOURCE OPTION, Theory of Operation C7.0 Operation C5.1 UL RequirementsC6.0 Ordering Information Example Magnum QS5116-48VDC