GarrettCom Quad manual Introduction, Table of Contents

Magnum Quad-Series Fiber Switches			Installation and User Guide (06/03)
TABLE OF CONTENTS				Page
1.0	SPECIFICATIONS			1
1.1	Technical Specifications			1
1.2	Ordering Information			3
2.0	INTRODUCTION			4
2.1	Inspecting the Package and Product			4
2.2	Product Description - Magnum Quad-Series Fiber Switches			5
2.2.1		Magnum Quad-Series chassis models		5
2.2.2		Quad-port modules, 100Mb fiber		7
2.2.3		Quad-port modules, 10 Mb fiber		7
2.2.4		Quad-Port Module, RJ-45 (copper)		8

2.2.5Combo “3 + 1” Quad Port Modules, 3@RJ-45 and 1@fiber....... 8

2.2.6		Frame Buffering and Latency	9
2.3	Features and Benefits		11
2.4	Applications		12
3.0	INSTALLATION		15
3.1	Locating Magnum Quad-Series Switches		15
3.2	Connecting Ethernet Media		16
3.2.1		Connecting Fiber Optic ST-type, “twist-lock”	16
3.2.2		Connecting Fiber Optic SC-type, "Snap-In"	17
3.2.3		Connecting Single-Mode Fiber Optic	17
3.2.4		Connect Twist Pair (RJ-45,CAT3, CAT5, Unsh or Shiel)	17
3.3	Table-Top or Shelf Mounting		18
3.3.1		Wall (or Vertical Surface) Mounting, 8-port QS580	18
3.3.2		Rack-mounting, models QS5108 and QS5116	18
3.4	RJ-45 ports, int jump set for 10/100Mb		20
3.5	Fiber 100Mb ports, int jump set for 100Mb fixed		21
3.6	Combo(3+1) ports, int jump set for 10/100 RJ-45 Auto-Neg		22
3.7	Fiber 10Mb ports, int jump set for 10Mb fixed Half- or		23
3.8	Powering the Magnum Quad-Series Switch		24
3.9	Quad Port Module (QPM) Installation		25
3.9.1		Preparation for Installing and Removing QPMs	25
3.9.2		Installing QPM Cards in the Magnum Q-Series	27
3.9.3		Removing QPM Cards	29
4.0	OPERATION		30
4.1	Switching Functionality		30
4.2	Status LEDs		31

4.3Manual Switches for Up-link push-button, for RJ-45 quad-port ....... 31

4.4	Auto-negotiation, for Fast Ethernet copper ports	31
4.5	Auto-negotiation for 10 Mb ports, half- or full-duplex mode	33
4.6	Flow-control, IEEE 802.3x standard	33
4.7	Power Budget Calculations for Quad-Series QPM’s with Fiber	34
www . GarrettCom . com

iii