Make sure the docking release latch is in the fully raised position.

Chapter 8: Using the Optional Port Replicator

Connecting to the port replicator

You can attach your convertible tablet PC to the port replicator while your convertible tablet PC is off, on, or in Standby mode.

Attaching to the port replicator

To attach your convertible tablet PC to the port replicator:

1

2 Align the connector holes on the bottom of your convertible tablet PC with the docking posts on the port replicator.

3 Press down on the docking release latch until your convertible tablet PC moves into place.

4 Connect external devices to the ports on the port replicator.

Important The convertible tablet PC may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work correctly. Follow any on-screen instructions, if necessary.

112

www.gateway.com