Replace the front bezel by following the instructions in “Replacing the front bezel” on page 50.
Connect the new card reader cables, using your notes from Step 3.
7
8
9 Replace the side panel by following the instructions in “Replacing the side panel” on page 50.
6 Slide the new card reader into the bay from the front of the case, then slide the drive release latch forward to lock the drive into place. You do not need to replace the thumbscrew because it was originally installed for shipping purposes.
Important
The color and shape of your replacement reader's front cover may vary from your original reader.
Slide the card reader out of the case.
5
CHAPTER 5: Upgrading Your Computer
4 Remove the thumbscrew holding the card reader in the drive bay.
Thumbscrew

56