CHAPTER 5: Upgrading Your Computer
5Remove the hard drive by sliding it out of the drive bay.
6Slide the new drive into the drive bay, then secure it in the drive bay by sliding the drive release latch back.
7If you are replacing a drive, reconnect the drive cables using your notes from Step 4. If you are installing a new drive, follow the manufacturer’s instructions for connecting it to the system board.
You can also refer to the following figure for SATA port assignments:
SATA 6 port
SATA 5 port
SATA 4 port
SATA 3 port
SATA 1 port
SATA 2 port
8Replace the side panel by following the instructions in “Replacing the side panel” on page 50.
9Reconnect all external cables and the power cord.
10Turn on your computer.
58