CHAPTER 3: Setting Up and Getting Started
Configuring the audio jacks
If the back of your computer has five audio jacks, they are universal jacks. This means that they can be used for more than one purpose. For example, the blue jack on the computer can be a stereo in jack or a stereo out jack. To use the audio jacks for something other than the default audio device, you need to configure the audio jacks.
To configure the audio jacks:
Shortcut
Start Ö Control Panel Ö Hardware and Sound Ö Advanced

1Connect your audio device(s) to the computer audio jack(s).

2Click (Start), then click Control Panel. The Control Panel window opens.

3Click Hardware and Sound, Sound, the Playback tab, then click Configure.

-OR-

If your computer has the Realtek Sound Effect Manager installed, double-click the Sound Effect Manager icon on the taskbar. The Realtek dialog box opens.

4Follow the on-screen instructions to configure the audio jacks for your speaker setup.

Installing a printer, scanner, or other device

Important

Before you install a printer, scanner, or other peripheral device, see the device documentation and installation instructions.

Your computer has one or more of the following ports: IEEE 1394 (also known as Firewire®), Universal Serial Bus (USB), serial, and parallel. You use these ports to connect peripheral devices such as printers, scanners, and digital cameras to your computer. For more information about port locations, see “Checking Out Your Computer” on page 5.

28