
www.gateway.com
3Disconnect the fan cable from the system board. The location of the fan connection may vary, so trace the fan cable from the fan to the system board.
4Remove the fan mount by pressing in on the flat area (1) near the front, then rotating the fan mount (2) back.
2
1
5Slide the old fan out of the fan mount.
6Slide the new fan into the fan mount.
Caution
Be careful not to catch the wires connecting the power button to the system board when rotating the fan mount. A notch has been provided for routing these wires.
7Insert the tabs on the rear of the fan mount into the slots provided, then rotate the mount into place. The mount should lock into place.
57