Gateway MAN FX510 Adding or replacing the memory card reader

CHAPTER 4: Upgrading Your Computer

9Replace the front bezel by following the instructions in “Replacing the front bezel” on page 44.

10Replace the side panel by following the instructions in “Replacing the side panel” on page 44.

Adding or replacing the memory card reader

To add or replace the memory card reader:

1Remove the side panel by following the instructions in “Removing the side panel” on page 41.

2Remove the front bezel by following the instructions in “Removing the front bezel” on page 43.

3If you are adding a memory card reader, slide the drive release latch to the left to unlock it, then go to Step 7.

- OR -

If you are replacing a memory card reader, proceed to the next step.

4Disconnect the memory card reader cables, noting their locations and orientation. (You will reconnect the cables after you install the new memory card reader.)

52