www.gateway.com
107
Replacing the Kensington lock cap
Tools you need to complete this task:
Screws removed during this task:
•1 black M2×5 (hard drive)
•1 black M2.5×6 (optical drive)
•3 black M2.5×6 (keyboard cover)
• 2 black M2.5×6 (LCD panel hinges - bottom)
• 2 black M2.5×6+Nylok (LCD panel hinges - top)
•4 black M2.5×6+Nylok (LCD front panel)
• 2 chrome M2×4 (LCD hinge covers)
•4 black M2.5×6+Nylok (LCD front panel)
•3 black (Kensington lock cap)
To replace the Kensington lock cap:
1Complete the steps in “Preparing the notebook” on page47.
2Remove the LCD panel assembly by performing steps 2–15 of the
“Replacing the LCD panel assembly” procedure on page64.
3Remove the LCD front panel by performing steps 3–7 of the “Replacing the
LCD front panel” procedure on page 95.
4Move the LCD, webcam, microphone, and antenna cables away from the
Kensington lock cap screws.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe