www.gateway.com
93
4Use a flat-blade screwdriver to turn the processor lock screw
counter-clockwise.
5Remove the old processor from the system board.
6Align pin 1 of the new processor (indicated by the gold arrow on the corner
of the processor) with the beveled corner of the processor socket.
The processor will easily fit into the socket if you oriented it properly.
7Use a flat-blade screwdriver to turn the lock screw 180° clockwise to secure
the processor in place.
8Apply just enough thermal grease to evenly coat the surface of the processor
die.
9Reinstall the cooling assembly by performing steps 912 of the “Replacing
the cooling assembly” procedure on page89.
10 Reinstall the system board by performing steps 15 and 16 of the “Replacing
the system board” procedure on page 86.
11 Reinstall the palm rest by performing steps 1921 of the “Replacing the palm
rest” procedure on page68.
12 Reinstall the LCD panel assembly by performing steps 1623 of the
“Replacing the LCD panel assembly” procedure on page64.
13 Reinstall the keyboard and the keyboard cover by performing steps 58 of
the “Replacing the keyboard” procedure on page 62.
14 Close the LCD panel and turn the notebook over so the base is facing up.
Discrete model UMA model
Discrete model UMA model