CHAPTER 3: Replacing notebook components
50
Adding or replacing memory modules
Tools you need to complete this task:
To add or replace memory modules:
1Complete the steps in “Preparing the notebook” on page47.
2Complete the steps in “Removing the bay cover” on page 49.
3If you are replacing a memory module, go to step4.
If you installing an additional memory module, go to step 6.
4Use a non-marring plastic scribe to push out the latches on both sides of
the memory slot until the module tilts upward.
5Remove the memory module from its slot.
Important
Use only memory modules designed for this Gateway notebook.
Phillips #0 screwdriver Non-marring plastic scribe