
www.gateway.com
57
5If your new optical drive already has it’s own bracket and bezel, go to step10.
If you need to use the bracket and bezel from the old optical drive, perform
steps 6–9 as necessary.
6Detach the bezel from the old optical drive.
7Remove the screws that secure the optical drive bracket, and then detach
the bracket from the drive.
8Attach the bezel to the new optical drive.
9Attach the bracket to the new optical drive and secure it with the screw
removed in step 7.
10 Slide the new optical drive into the drive bay and make sure it’s properly
engaged to the ODD1 connector.
11 Secure the new drive to the system board with the screw removed in step3.
12 Reinstall the bay cover.