
CHAPTER 3: Replacing notebook components
72
Replacing the speakersTools you need to complete this task:
Screws removed during this task:
•1 black M2×5 (hard drive)
•1 black M2.5×6 (optical drive)
•3 black M2.5×6 (keyboard cover)
• 2 black M2.5×6 (LCD panel hinges - bottom)
• 2 black M2.5×6+Nylok (LCD panel hinges - top)
• 10 M2.5×6 black (palm rest - base side)
• 3 M2.5×6 black (palm rest - top side)
• 2 chrome M2×3 (speakers)
To replace the speakers:
1Complete the steps in “Preparing the notebook” on page47.
2Remove the palm rest by performing steps 2–18 of the “Replacing the palm
rest” procedure on page 68.
3Turn the palm rest over so that its underside is facing up.
4Peel off the tape covering the left speaker screw.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe