CHAPTER 3: Replacing notebook components
54
Replacing the hard drive
Tools you need to complete this task:
Screws removed during this task:
•1 black M2×5 (hard drive)
• 2 chrome M3×3 (hard drive bracket)
To replace the hard drive:
1Complete the steps in “Preparing the notebook” on page47.
2Complete the steps in “Removing the bay cover” on page 49.
3Remove the hard drive screw.
4Grasp the black mylar tab and use it to disengage the hard drive from its connector,
and then remove the drive from its compartment.
Phillips #0 screwdriver Non-marring plastic scribe