231
Using the FlexDock
www.gateway.com
Using the FlexDock
The tablet joins the FlexDock at the docking connector in the center of the
frame holder. Be sure the tablet sits firmly on the connector to access all ports.
The silver crossbar adjusts to support the tablet at a range of angles for
viewing and writing.
In addition to the two USB ports on the back, the FlexDock includes an
extra USB port on the front for convenience.
When using the tablet’s modem, plug the telephone cord into the tablet
through the cutout on the front of the FlexDock.
The FlexDock senses and automatically adjusts the tablet’s display
orientation when rotated between Primary Landscape and Primary Portrait
modes. When you are ready to move from desktop to mobile mode, the
FlexDock is completely Grab-and-Go. This means you can safely lift the
tablet out of the FlexDock without shutting down, putting the tablet in
Standby mode, or stopping any peripheral devices through Windows XP.
However, you must disconnect the modem cable before removing the
tablet.