242
Chapter 17: Troubleshooting
www.gateway.com
You see a “Non-system disk”, “NTLDR is missing”, or “Disk error”
error message
■Eject the diskette from the diskette drive, then press ENTER.
■Make sure that the diskette you are using is IBM-compatible.
The diskette drive status indicator is lit continuously
■Remove the diskette from the drive. If the indicator stays on, try restarting
your tablet PC.
Display
The screen is too dark
■Adjust the brightness using the dashboard. For more information, see
“Using the Motion Dashboard” on page 160.
The screen resolution is not correct
■Change the screen resolution from the Display Properties dialog box. For
more information, see “Adjusting the screen resolution” on page152.
The screen is unreadable or distorted.
■Adjust the brightness using the dashboard. For more information, see
“Using the Motion Dashboard” on page 160.
■Screen resolution or color quality are set incorrectly. Reset resolution to
1024 × 768 and color quality to 32-bit under the Settings tab of the Display
Properties dialog box. For more information, see “Adjusting the screen and
desktop settings” on page 151
■Move your tablet PC away from sources of electrical interference, such as
televisions, unshielded speakers, microwaves, fluorescent lights, and metal
beams or shelves.
■Display driver has become corrupted or uninstalled.

To reinstall the display driver:

1Tap Start, then tap Control Panel. The Control Panel window opens.
If your Control Panel is in Category View, tap Performance and
Maintenance.
2Tap/D oubl e-ta p System, tap the Hardware tab, then tap Device
Manager. The Device Manager window opens.