GateWay Fax Systems, inc. Model 90si Secure Fax Gateway User's Guide
www.gwfs.com, 877-951-9800, info@gwfs.com help line: 877-951-9814 page 12
2.6 Setting Up Your Encryption Device
The following sections provide step-by-step procedures for setting your secure telephone / encryption device for
Asynchronous 9600bps secure data mode.
2.6.1 L-3 Secure Terminal Equipment (STE)
Objective: To set the secure data mode to Asyncronous 9.6Kbps.
For STE's with software V2.3 or earlier:
While On-Hook (to permanently set)
Press Display
MODE (Example) SECURE DATA: S19.2 (Synchronous, 19.2Kbps)
CHANGE Secure Data Synchronous
CHANGE Secure Data Asynchronous (Sets Asynchronous)
SCROLL (Example) 19.2 Kbps
SCROLL (until) 9.6 Kbps
MODE (blank display)
For STE's with software V2.4 and later:
While On-Hook (to permanently set)
Press Display
MODE SECURE SIGNALLING MODE: STE/STU
SCROLL SECURE DATA: /STU SECURE VOICE
CHANGE (Example) SECURE DATA: S19.2 (Synchronous, 19.2Kbps)
CHANGE (until) SECURE DATA: Asynchronous
SCROLL (Example) 19.2 Kbps
SCROLL (until) 9.6 Kbps
MODE (blank display)
Note that to permanently set the Secure Data mode, the handset must be on-hook. If you do these procedures with
the handset off-hook, the changes hold for the current call only. When you hang up, the Secure Data settings will
revert to the previous settings.