GateWay Fax Systems 90SI manual 2 L-3 Omni / OMNIxi, Code Setting

GateWay Fax Systems, inc. Model 90si Secure Fax Gateway User's Guide

2.6.2L-3 OMNI / OMNIxi

Objective: To set the Secure Data mode to PSTN, Async, 9600 bps.

Apply power to the omni and login as an Authorized User <AU> or Terminal Administrator <TA>...

Press	Display
(logon)	LOGON SUCCESSFUL
ENTER
MENU	<TA MENU> / 0-EXIT TA MODE / 1-ZEROIZE
2, ENTER	<OMNI CONFIG> / 1-TERM CONTROL / 2-SET NETWORK
2, ENTER	(Example) NET: PSTN-SYNC / 1-PSTN ASYNC / 2-PSTN-SYNC
1	NET: PSTN-ASYNC
ENTER
BACK	<OMNI CONFIG> / 1-TERM CONTROL / 2-SET NETWORK
6, ENTER	(Example) Async 19200 bps
3, ENTER	Async 9600 bps
MENU	(to exit)

If your OMNI / 90si does not work after you make the above changes, confirm the following setting. To view these settings press the Menu button followed by each individual code digit followed by Enter. For example, 2,1 would be Menu, 2, Enter, 1, Enter to view the Term Control setting.

Code	Setting	Code
2,1	Term Control = Local	2,14
2,2	Set Network = PSTN ASYNC	3,1
2,4	Set LCL Port = EIA232	3,2,1
2,6	Set Rate = ASYNC 9.6 kbps	3,2,4
2,7,1-4	CLK Polarity = (set all to Normal)	3,3,1
2,12	DTE TX CLK = OMNI	3,3,4
2,13	RESYNC INTRVL = DSBL

Setting

Signaling = STANDARD

SEC Settings/Secure Mode = Traditional

SEC/SACS Voice/Secure Voice = ENBL

SEC/SACS Voice/ACL SEC Voice = DSBL

SEC/SACS Data/Secure Data = ENBL

SEC/SACS Data/ACL SEC Data = DSBL

Required L-3 provided LDI Red Data Cable: Each OMNI ships with a Local Data Cable, L-3 part number K10048260-4. One end of this cable terminates in a DB25 connector (into which the 90si plugs), the other con- nects to the "Local Data" connector on the back of the OMNI/OMNIxi.

www.gwfs.com, 877-951-9800, info@gwfs.com help line: 877-951-9814 page 13