7-18 GCC Elite Color 16 Series User’s Guide
System Menu
System Menu
The system menu provides access to system settings. Use the following procedure to enter the
system menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “System Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the system menu.
4. Press the NEXT button to move through the submenus: Factory Defaults, Display
Language, Alarm Control, Wait Timeout, Job Timeout, Jam Recovery, Hex Print,
Toner Out and Intellifilter.
5. Press the SELECT button to enter a submenu.
6. Use the NEXT or PREVIOUS buttons to scroll through the available settings, then press
the SELECT button to save the setting.
Submenus Available Settings (Bold is
Default)
Description
Factory Defaults U.S.
Non-U.S.
This submenu allows you to reset the printer to U.S. or
Non-U.S. factory defaults.
Display Language English
Francais (French)
Deutsch (German)
Italiano (Italian)
Espanol (Spanish)
This submenu allows you to change the language of
the display messages.
Alarm Control Single
Continuous
Off
This submenu allows you to set the alarm control.
Wait Timeout 00000 - 99999 (00020) This submenu allows you to increase or decrease the
length of time (in seconds) that the printer will remain
in the waiting state—a job is being processed, no
end-of-file has been detected, and there is no more
data to process. This setting applies to both PCL and
PostScript print jobs.
Job Timeout 00000-99999 This submenu allows you to increase or decrease the
time limit (in seconds) for PostScript jobs. A 0 setting
indicates no timeout. This setting applies only to
PostScript jobs.
Jam Recovery On
Off
This submenu allows you to turn jam recovery on or
off.
Hex Print On
Off
This submenu allows you to print hexadecimal
characters.