Note

For any keypress on the Keychain Touchpad, hold the button until the indicator light blinks.

Note

Panic alarms need to be silenced from the panel, a remote handheld touchpad or another keychain touch- pad. They cannot be silenced from the same key- chain that activated the alarm.

Lights

￿Turn on individual lights that are controlled by Lamp Modules:

1.Press Lights On button once.

2.Press the number of the lamp module you want to turn on. Panel will announce, light <number> on.

￿Turn off individual lights that are controlled by Lamp Modules:

1.Press Lights Off button once.

2.Press the number of the lamp module you want to turn off. Panel will announce, light <number> off.

Emergency

Press both EMERGENCY buttons for 3 seconds to cause the system to call a central monitoring station to report a non-medical emergency.

Keychain Touchpad

For any keypress on the Keychain Touchpad, hold the button until the indicator light blinks.

If your installer programmed the Keychain Touchpad with no entry delay, and you armed the system with the Keychain Touchpad, you must disarm your system before entering the home to avoid causing an alarm.

If your installer programmed your system for Remote Touchpad Arming, you must enter your home to start the entry delay before you can use your Keychain Touchpad to disarm the system.

!To avoid causing false alarms, check with your installer on how your touchpad options are programmed

Warning

LOCK Press once to arm doors and windows.

LOCK Press twice to arm doors, windows, and Motion Sensors.

LOCK Press 3 times to arm doors, windows, Motion Sensors, and to activate the Latchkey option.

LOCK and UNLOCK

Press both buttons simultaneously for 3 seconds to send a panic (intrusion, silent, or non-medical emergency) alarm to the central monitoring station. Check with the installer to find out how the keychain touchpad panic buttons will operate

UNLOCK Press to disarm your security system.

STAR Can be programmed to control a device connected to a universal mod- ule.

RF Thermostat Operation

These guidelines must be followed for RF Thermostat operation:

•The panel needs to be armed to Doors & Windows and Motion Sensors to enter Energy Saving Mode.

•If there are no Motion Sensors in the system, the Motion Sensors button must still be pressed.

12

Security Pro 1000