GE 1000 Numeric Pager, Panel Indicator Lights, Panel Indicator Lights, Numeric Pager Reporting, Alarm Siren and X10 Light Information

Alarm Siren and X10 Light Information

		Fire	Intrusion	Emergency
X10	Lights	Steady	Flashing	Steady
X10	Siren	Steady	Steady	Alarm beeps
Interior & Panel Siren		Temporal 3	Steady	Fast on/off
Exterior Siren		Temporal 3	Steady

Panel Indicator Lights

Use the following table to understand the panel indicator lights.

Panel Indicator Lights

Button	When the Button Light is	When the Button
	On	Flashes
Arm Doors & Windows	Doors/Windows armed	Doors/Windows armed
		& No Entry Delay on
Arm Motion Sensors	Motion Sensors armed	Motion Sensors armed
		& Latchkey on
Disarm	System disarmed	System subdisarmed
System Status	System trouble or Open Sen-	System in alarm
	sor
Chime Doors	Door will cause chime	_________________
Chime Special Motion	Motion will cause chime	_________________
Time Lights	Time activated lights on	_________________
Sensor Lights	Sensor activated lights on	_________________

Numeric Pager

You may program your security system to send a numeric message indicating system activities to your pager. The system will send the message twice. See “Programming Instructions”.

Use the following table to determine what the numeric message is reporting.

Numeric Pager Reporting

Reports	Numeric Message	Reports	Numeric Message
Phone Test	-101 -101	Intrusion	-108 -108
AC Power Restore	-102 -102	Fire	-109 -109
AC Power Failure	-103 -103	Disarming	-110 -110
Latchkey	-104 -104	Arming	-111 -111
No Activity	-105 -105	Fail to Open	-112 -112
Emergency	-107 -107	Fail to Close	-113 -113

Security Pro 1000 9